This product has a non-intense, perfumed smell.
Our chipping medium works even with lacquers and, like many of the other products, is fragranced. The bottle is fitted with an atomizer, so you can use the product straight from the bottle if you don’t want to get your airbrush dirty. However, we recommend using it for more precise applications. Work at a pressure of about 1.5 bar. Remember that the product is unsuitable for brush painters because you will activate it simultaneously with brush strokes.
Instructions for use:
Step 1. Paint the model with the color you want for scratches; let it dry completely. We can recommend the “Weathering Paint: Chipping” paint.
Step 2. Spray the model with “Easy Chipping Medium” using an atomizer misting from about 30-40 cm. If airbrushing, close the distance to about 15 cm. The thicker you apply, the more extensive the abrasions will be. Spray reasonably so that the model is not too flooded with the medium. Leave to dry for about 30 minutes. Do not use a hairdryer. It is better to apply one thick layer than many thin ones.
Step 3: Using a spray or airbrush, paint the model in the target colors. This product will only work with acrylic paints and lacquers, not enamels. You can apply modulation and multiple coats but do not use masking tape. Let dry for at least 30 minutes, not more than a few hours.
Step 4: Wet the surface with clean water. Scrape the paint off using a rough-bristle brush (recommended), toothpicks, or similar tools. Work sensitively. When you are finished, we recommend applying a clear varnish coat before the next weathering steps.
The bottle contains no less than 30 ml of medium.
Check out the video of talented modeler Luke Orczyc Musiałek from the Coldemonspl channel.
Reviews
There are no reviews yet.